Controls | E.LEVEL, F.BACK, D.TIME, MODE
Pedal switch | | Indicator | CHECK (Used for indication of TEMPO, HOLD, and to check battery) | | Connectors | INPUT-A (MONO) jack, INPUT-B jack
OUTPUT-A (MONO) jack, OUTPUT-B jack
TEMPO/EXP jack
AC adaptor jack (DC 9 V) | | Delay Time | 1 ms to 6400 ms*
Maximum recording time: 40 sec (in Hold mode)
*Values may vary according to the mode and connections. | | Nominal Input Level | -20 dBu | | Input Impedance | 1 M ohm | | Nominal Output Level | -20 dBu | | Output Impedance | 1 k ohm | | Recommended Load Impedance | 10 ohms or greater | | Power Supply | DC 9 V:
Dry battery, 9 V type (6F22/carbon, 6LR61/alkaline)
AC Adaptor (PSA-series: optional) | | | DC 9 V: Dry battery 6F22 (9 V) type (carbon)/
Dry battery 6LR61 (9 V) type (alkaline),
AC Adaptor (PSA-series: optional) | | Current Draw | 55 mA (DC 9 V)
* Expected battery life under continuous use: Carbon: 1.5 hours, Alkaline: 6 hours. These figures will vary depending on the actual conditions of use. | | Accessories | Owner's Manual, Mode Sticker, Application Sticker, Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V type, 6LR61) *1 | | Options | AC adaptor (PSA-series), Footswitch: FS-5U, Expression pedal: Roland EV-5 |
| Size and Weight | | Width | 73 mm | 2-7/8 inches | | Depth | 129 mm | 5-1/8 inches | | Height | 59 mm | 2-3/8 inches | | Weight | 0.4 kg | 1 lbs. |
|
|
|
|
|
|
*1 The battery that is supplied with the unit is for temporary use, intended primarily for testing the unit's operation. We recommend that alkaline battery be used when replacing the battery.