BOSS SL-20 Slicer :: Specifications

Nominal Input Level	-20 dBu

Input Impedance	1 M ohm

Nominal Output Level	-20 dBu

Output Impedance	1 k ohm

Recommended Load Impedance	10 k ohms or greater

Tempo	30 to 250 bpm

Maximum recording time	40 seconds

Controls	START/STOP pedal, TAP pedal, EFFECT LEVEL knob, DIRECT LEVEL knob, BANK knob, PATTERN knob, ATTACK knob, DUTY knob,TEMPO knob, OUTPUT MODE button, PEDAL MODE button

Indicators	POWER indicator (serves also as the battery check indicator), START/STOP indicator, REC indicator, PLAY indicator, TAP indicator, MONO indicator, FIXED indicator, RANDOM indicator, PING-PONG indicator, AUTO indicator, 3D PANNNER indicator, 3D CROSS indicator, LATCH indicator MOMENTARY indicator, TEMPO indicator

Connectors	INPUT jacks R/MONO, L (1/4 inch phone type), OUTPUT jacks R/MONO, L (1/4 inch phone type), EXP PEDAL jack (1/4 inch TRS phone type), MIDI IN connector, DC IN jack (DC 9 V)

Power Supply	DC 9 V, Dry battery LR6/R6 (AA) type x 6/AC Adaptor *1

Current Draw	110 mA

Accessories	Owner's Manual, Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (R6 (AA) type (carbon) x 6) *2

Options	AC adaptor (PSA-series), Expression pedal (Roland EV-5)

Size and Weight

Width	173 mm	6-13/16 inches

Depth	158 mm	6-1/4 inches

Height	57 mm	2-1/4 inches

Weight	1.1 kg	2 lbs. 7 oz.

Including battery

* 0 dBu = 0.775 Vrms 1 Expected battery life under continuous use: 7 hours (Carbon), 18 hours (Alkaline). These figures will vary depending on the actual conditions of use. 2 The battery that was supplied with the unit is for temporary use-intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.
* The specifications are subject to change without notice.